Magnavox VR201BMG owner manual Real-Time Counter Memory, Slp

34 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.

1

Play, fast forward, or rewind a tape to the location that you would like to refer to later. Press the STOP/p button to stop the tape.

2

Press the STATUS/EXIT button to see the status display.

STOP	1:08PM
	CH10
SLP 1 : 23 : 45	2
3	5

While the status display is on the screen, press the CLEAR button to reset the real-time counter to zero.

STOP	1:08 PM	1
	CH10
SLP	0 : 00 : 00

POWER VCR/TV EJECT

1 2 3

4 5 6

7 8 9 CHANNEL

0

SPEED MEMORY

MENU STATUS/EXIT CLEAR

REWIND /PLAYF.FWD

REC/OTR /STOP PAUSE/STILL

4

3

4

While the real-time counter is on the screen, press the MEMORY button so that M appears beside the counter.

STOP	1:08 PM
	CH10

SLP M 0 : 00 : 00

5

To go to a tape location where the real-time counter was reset to zero, press the REWIND/{ button or the F.FWD/B button when playback is stopped.

When the tape reaches the point at which the counter was set to zero, the tape will stop.

Press the PLAY/o button to watch the tape.

Helpful Hints

•The MEMORY button does not function if REPEAT PLAY is set to ON. Details are on page 33.

•To erase a real-time counter memo- ry, press the MEMORY button until the M disappears from the screen.

•You may only set the real-time counter to zero at one location at a time. If you set the real-time counter to zero at a second loca- tion, the previous real-time counter to zero setting will be erased.