Magnavox VRA431AT99 Automatic Clock Setting, Press the VCR button, then press the Menu button

Automatic Clock Setting

1

Press the VCR button, then press the MENU button.

SELECT op CHOOSE B

→PROGRAM VCR SET UP TUNER SET UP SET CLOCK

TO END PUSH EXIT

Setting the Clock (cont’d) 17

4 2-4

POWER VCR/TV EJECT

1 VCR TV CBL/DBS

PLAY

REWF.FWD

STOP

23

Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.

3

If OFF appears to the right of AUTO CLOCK, press the F.FWD/B button to select ON. Then, press the MENU button. Or, if ON appears to the right of AUTO CLOCK, press the MENU button. Go to step 4.

AUTO CLOCK

AUTO CLOCK USES PBS CHANNEL DATA

→SET PBS CH. AUTO SET PBS CH. MANUAL

SELECT op CHOOSE B

TO END PUSH EXIT

MENU STATUS/EXIT CLEAR

1	2	3
4	5	6	CH
7	8	9
VCR PLUS+/ENTER		ALT. CH

0VOL

SPEED TIME SEARCH PAUSE/STILL

REC/OTR MEMORY SLOW MUTE

4

4

●If you want the VCR to locate a local PBS station from which to take the time, press the PLAY/o button or the STOP/p button to select SET PBS CH. AUTO. Then press the F.FWD/B button. When the current time appears on-screen, you’re finished. Press the STATUS/EXIT button.

Or, you may be prompted to turn off the VCR. Turn off the VCR power, and leave it off for several minutes. When the cur- rent time appears on the VCR display panel, the clock is set. You may turn on the VCR again.

●If you want to tell the VCR the PBS station from which to take the time, press the PLAY/o button or the STOP/p button to select SET PBS CH. MANUAL. Press the F.FWD/B button, then use the Number buttons to enter the channel number of the desired PBS station. When the current time appears on-screen, you’re finished. Press the STATUS/EXIT button.

NOTE: CANNOT FIND PBS CLOCK DATA may flash on-screen. Press the PLAY/o button or the STOP/p button to choose SELECT NEW PBS CH., then press the F.FWD/B button. Use the Number buttons to enter the channel number of another PBS station. Or, press the PLAY/o button or the STOP/p button to select SET PBS CH. AUTO. Press the F.FWD/B button. You will be prompted to turn off the VCR. Turn off the VCR power, and leave it off for several minutes. When the current time appears on the VCR display panel, the clock is set. You may turn on the VCR again.

Helpful Hints

•If you enter an incorrect PBS chan- nel number at step 4, press the CLEAR button, then enter the cor- rect channel number.

•If you have an antenna, you may select channels 2 - 69 at step 4. If you have a cable connection, you may select channels 1 - 125.

•The clock cannot be set automati- cally if you don’t receive a channel that carries a time signal in your area. Set the clock manually.

•If there are only a few channels in your area that carry time signals, setting the clock automatically may take several minutes. If nothing happens even after you wait several minutes, set the clock manually.

•You cannot select AUTO CLOCK at step 3 during tape playback.