Panasonic EB-X800 manual Connection settings, Access point settings

Settings

	Select On to start dialling by a press and hold of preset
Speed dialling	number key in standby mode. First, set up Speed dial
	keys (see “Speed dial” on page 59).
Anykey answer	Select On to answer incoming calls by pressing any key
	except [6], [w] or [,].
	Select On to answer a call by opening the flip clamshell
	and to disconnect phone calls by closing the flip
Active	clamshell. When set to Off, you must answer the
clamshell	incoming call by [q]. Closing the flip clamshell switches
	the caller’s voice to the back loudspeaker and mutes
	your voice.
Line in use*2	You can have two different phone lines with the same
	SIM card. Select Line 1 or Line 2.
Line change*2	You can disable selection of one of the phone lines. The
	PIN2 code is required to return use of a previously
	blocked line.

*1

*2 Available if you have subscribed to Alternative Line Service.

Connection settings

Access point settings

Your phone uses three main sets of access points: Multimedia (MMS), Browser, and Internet. Access points must be set up in order to send and receive multimedia and e-mail messages, use the Browser, SyncML and Device Manager, and use your phone as a modem.

Access points use data services to connect.

Some or all of your access points may be preset in the phone by your service provider and cannot be modified, but you may be able to add new access points. The access point configurations may be sent to you in a smart message by your service provider.

46