Panasonic EB-X800 manual Settings z Main menu Settings Settings Security Phone and SIM

Settings

z Main menu > Settings > Settings > Security > Phone and SIM

1.[192] to scroll to the desired setting 7 [0]

Activate Phone	Select Yes to require entry of PIN code each time the
PIN	phone is switched on. Requires PIN code to activate.
PIN	To change PIN code, enter current PIN code, new PIN
	code twice, then [5] (OK).
PIN2	To change PIN2 code, enter current PIN2 code, then
	new PIN2 code twice, then [5] (OK).

Note: If PIN or PIN2 code is entered incorrectly 3 times, the SIM card locks. Contact your service provider for PUK or PUK2 code (PIN unblock key code). If the PUK or PUK2 code is entered incorrectly 10 times, the phone will not operate. All information stored in the SIM card is lost and the SIM card must be replaced.

Entering lock code to use phone

When the phone is locked, the lock code must be entered before the phone can be used. The phone lock icon indicates that the phone is locked.

You may be able to dial the local emergency number and accept incoming calls when the phone is locked.

Shortcut: To lock the phone, [,] and select Lock phone.

z Main menu > Settings > Settings > Security > Phone and SIM

1.[192] to scroll to the desired setting 7 [0]

Autolock	Set the phone to lock after a time period of no activity.
	Select User defined to enter time period in minutes.
period
	Requires lock code to set.
	To change the lock code, enter the current lock code,
Lock code	then new lock code twice. Record the new code in a safe
	place. The preset lock code is 12345.
	51