Panasonic EB-X800 manual Opening/closing the phone, Switching the phone on/off, Getting Started

Getting Started

Opening/closing the phone

You can open your phone by pressing the One	One Push Auto
Push Auto Open button.	Open button

Clamshell setting

Opening the phone answers the incoming call and closing the phone ends the call.

When Active clamshell setting is set to Off (see page 46), you must answer the incoming call by

[q]. Closing the phone switches the caller’s voice to the back loudspeaker and mutes your voice. However, when you are using a headset,

you can continue your conversation even while the phone is closed.

Switching the phone on/off

1.Press and hold [,] for 2 to 3 seconds to switch the phone on

A greeting may be displayed and the phone enters standby mode.

2.Press and hold [,] for 2 to 3 seconds to switch the phone off

OR

[,] 7 [192] to scroll to Switch off! 7 [0]9[5] (OK)

Note: If your SIM card is PIN protected, your PIN code will be requested. Enter the PIN code and [5] (OK). See “Security settings” on page 50.

20