Change the camera settings to the settings to be registered as My Settings.
Display the SETUP menu.
• For the operating procedure, see P.107.

6

Changing Camera Settings

Registering the Power-on Settings

(REG. MY SETTINGS)

The My Setting function allows you to make your desired settings to be used at power-on. For example, when a digital camera is used in common by multiple persons, you can use the camera without regard to the settings made by the person who used the camera previously because the camera settings are restored to your settings each time the camera is turned on.

Two types of My Settings can be registered.

To register the current camera settings as My Settings, follow the steps below.

1

2

3 Press the " button to select [REG. MY SETTINGS] and press the $ button.

• A confirmation message appears.

4 Select [SETTING1] or [SETTING2] and press the MENU/OK button.

The current camera settings will be registered and the display returns to the SETUP menu.

If you do not want to register them, press the DISP. button.

5 Press the MENU/OK button.

126

Page 129
Image 129
Ricoh 500SE manual Registering the Power-on Settings, REG. MY Settings, 126