Ricoh 500SE manual Loading the Battery and SD Memory Card, Insert the rechargeable battery

Loading the Battery and SD Memory Card

The rechargeable battery (DB-43) can be used to power this camera. This battery is convenient because the battery power lasts long and it can be used over and over again by recharging. If you have already used this camera, make sure it is turned off before loading the battery and card.

1 Turn the battery/card cover knob toward the M mark to open the cover.

2 Make sure the SD memory card is facing the right way and then push the card all the way in until it clicks.

• The rechargeable battery may be inserted first.

3 Insert the rechargeable battery.

• Lift the latch with the battery and insert the battery all the way into the battery compartment.

• When the rechargeable battery is loaded in place, it is locked with the latch.

Loading AA alkaline batteries (available in stores)

• Insert the batteries in the direction shown.

• Insert the top battery while
using the battery to lift the latch.	+
	-
	-
	+

If you are using the camera for the first time, read this section.

25