Ricoh 500SE manual 217, When Quick Send Mode is set to 2TOUCH

When [QUICK SEND MODE] is set to [2TOUCH]

1 Check that the destination device (computer) is turned on. 2 Turn the mode dial to 5/Kand shoot the picture.

3 Press the Q (Quick Review) button.

• A screen appears confirming whether to send the file.

4 Press the MENU/OK button.

•If [SEND CONDITION] is set to [ON], the [SEND TO] screen appears.

•If [SEND CONDITION] is set to [OFF] (GP.219), sending to the destination selected in [SEND TO] (GP.220) begins, and the progress is displayed.

•If the communication list has not been transferred, or if [SEND CONDITION] is

set to [OFF] (GP.219) and the destination setting is incorrect, an error message appears and the display returns to the Playback Setting menu.

•If the camera is connected with a Bluetooth®-enabled device, a screen appears confirming whether to disconnect the connection. Select [YES] and press the MENU/OK button. (GP.174, P.182, P.184)

5 Press the !" buttons to select the desired destination device and then press the MENU/OK button.

•Transfer of the files to the destination device begins and the progress is displayed. Pressing the DISP. button cancels the operation. Pressing the 6 (Playback) button or shutter

release button or turning the mode dial also cancels the operation.

•If an error message appears during transfer, follow the message instructions and resend the files. For details about the error messages, see P.223.

•Once the connection is established,

the camera returns to shooting mode and remains connected to the destination device. You can change to playback mode or voice memo mode or remain connected to the destination device until the camera is turned off. The wireless LAN antenna icon appears on the LCD monitor while the camera is connected.

Using the Wireless LAN Function (Only for Caplio 500SE-W)

10

217