Ricoh 500SE manual Setting the Date and Time

Setting the Date and Time

When the power is turned on for the first time, the date/time setting screen appears.

1	Press the !"#$ buttons to
	set the year, month, date and
	time.
	• Change the value with !" and
	move the frame with #$.
2	Setting at shipping
	In [FORMAT], choose the
	date and time format.
	• Select the date and time format
3	with !".
	Check the display and then
	press the MENU/OK button.

• The date is set.

• Pressing the DISP. button on this screen allows you to cancel the setting.

Note ---------------------------------------------------------------------------------------------------

•If the battery is removed for more than one week, the date and time settings will be lost. These settings must be made again.

•To retain the date and time settings, load a battery with adequate remaining power for more than two hours.

•The set date and time can be changed later. (GP.119)

•The date and time can be inserted into images. (GP.77)

If you are using the camera for the first time, read this section.

31