Ricoh 500SE manual 169, Sending Several Still Images

Sending Several Still Images

1 Check that the destination device (computer) is turned on.

2 Press the 6 (Playback) button.

•For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the Expanded Settings menu. (GP.193)

3 Press the 9 (Thumbnail Display) button twice.

•The screen is divided into 12 frames and thumbnails of the still images are displayed.

4 Press the MENU/OK button.

• The Playback Setting menu appears.

5 Press the " button to select [FILE SEND] and then press the $ button.

•When the Bluetooth® function is used for the first time, a screen appears confirming whether to search for a destination device.

•If you have already searched for a destination device, a list of destination devices appears. Go to Step 7.

•If the camera is connected using a serial connection, a screen appears confirming whether to disconnect the serial connection. Select [YES] and press the MENU/OK button, and go to Step 7.

6 Press the $ button to select [YES] and then press the MENU/OK button.

•The camera begins searching for a destination device and a list of destination devices appears when the search is completed.

•By default, up to five devices can be discovered, but you can change this to

search for any number of devices between one and ten. (GP.176)

Using the Bluetooth® Function

8

169