Using the Bluetooth® Function

8

7 Press the MENU/OK button.

Transfer of the images to the destination device begins and the progress is displayed. Pressing the DISP. button cancels the operation. Pressing the 6 (Playback) button or shutter release button or turning the mode dial also cancels the operation.

If a passkey is required to connect to the destination device, a message appears prompting you to enter the passkey. (GP.162)

If an error message appears during transfer, follow the message instructions and send the images again. For details about the error messages, see P.222.

Once the transfer is completed, the

camera returns to shooting mode and remains connected to the destination device. You can change to playback mode or voice memo mode or remain connected to the destination device until the camera is turned off. The Bluetooth® antenna icon appears on the LCD monitor while the camera is connected.

Note ----------------------------------------------------------------------------------------------

If an image is sent to a Bluetooth®-enabled device using [PRINT] (GP.157) or [FILE SEND] (GP.166) in playback mode before Quick Review Send, destination devices are not searched for again even if the camera is turned off and then on again. Transfer of images to the previous destination device begins. When the transfer is completed, the camera returns to shooting mode and remains connected to the destination device.

Once Quick Review Send is performed to a Bluetooth®-enabled device in shooting mode and, thereafter, the camera is connected to a destination device, the camera does not search for destination devices again. Transfer of images to the previous destination device begins. When the transfer is completed, the camera returns to shooting mode and remains connected to the destination device.

During manual focus (GP.65), you cannot use Quick Review Send to send still images to a device even when [QUICK SEND MODE] is set to [2TOUCH].

The size of the images to be sent can be set beforehand. (GP.178)

To disconnect after Quick Review Send --------------------------------------------

 

Once Quick Review Send is completed, the camera returns to shooting mode and

 

remains connected to the destination device. To disconnect, switch to playback mode or

174

voice memo mode, or turn the camera off.

 

Page 177
Image 177
Ricoh 500SE manual 174, To disconnect after Quick Review Send