Ricoh 500SE manual 229, Other Problems

Other Problems

Problem	Cause	Solution	Refer to
Cannot load the SD	The card is facing the wrong way.	Load correctly.	P.25
memory card.
The camera does not	Battery is running low.	Charge the rechargeable battery	P.24
operate even when the		or use the AC adapter. Replace	P.27
buttons are pressed.		the alkaline batteries with new	P.25
		batteries.
	Camera malfunction.	Press the power button to turn the	P.29
		camera off, and then press the
		power button to turn the camera
		on again.
		Remove the battery and load it	P.25
		again. Reconnect the AC adapter	P.27
		cable properly, if using.
The date is incorrect.	The correct date/time are not set.	Set the correct date/time.	P.119
The set date disappeared.	The battery was removed.	If the battery is removed for about	P.119
		one week, the date setting will be
		lost. Make the settings again.
Auto power off does not	Auto power off is set to [OFF].	Set the time for auto power off.	P.113
work.
The beep sound cannot	The beep sound volume is turned	Use [VOL. SETTINGS] to set the	P.115
be heard.	off.	volume to a setting other than
		mute.

Appendices

11

229