Ricoh 500SE manual 195, Click the Add button under the Setup Name list

• The settings for the Detailed Setups tabs are as shown below.

Detailed Setups tab	Settings
Network	IP address and other settings (Send via Mail, Send via FTP)
Wireless LAN	Wireless LAN settings (Send via Mail, Send via FTP)
Dial-up	This camera is not configured for a dial-up connection, so this
	setting is not required.
FTP Send	Destination FTP server name and other settings (Send via FTP)
Mail Config.	Destination SMTP server name and other settings (Send via Mail)
Address Book	Destination mail address settings (Send via Mail)

Note ----------------------------------------------------------------------------------------------

•If there is no FTP server, you can set your computer as a Caplio server and specify the destination for sending via FTP. (GP.199)

•You can also make the advanced settings for each individual setting by clicking the [Detail] button to the right of the setting on the [Caplio Setting] screen.

5 Click the [Add] button under the [Setup Name] list.

•The [New Name for the Setup] dialog box appears.

6 Enter a setting name, and then click [OK].

7 Make the advanced settings.

•For the available advanced settings, see P.196.

•To delete a setting, select the setting you want to delete, and click the [Delete] button.

•To rename a setting, select the setting you want to rename, click the [Rename] button, and enter the new setting name in the [New Name for the Setup] dialog box.

8 To make other advanced settings, click the tab with the setting you want to make, and repeat Steps 5 to 7 above.

9 Click [OK].

• The display returns to the [Caplio Setting] screen.

Caution------------------------------------------------------------------------------------------

For details about the settings, consult your system administrator.

Note ----------------------------------------------------------------------------------------------

Using the Wireless LAN Function (Only for Caplio 500SE-W)

10

When [Apply] is clicked, the current setting is registered. 195