Ricoh 500SE 151, Downloading Images in Mass Storage Mode, Change USB Connection to Mass STR on

4 Connect the USB cable to the USB terminal of your camera.

• Your camera turns on.

• Your computer automatically reads a Example of the display in

file necessary for recognizing the Windows XP camera as a drive.

• After this preparation, the camera is displayed as a drive at [My Computer] (Windows) or Desktop (Macintosh).

•To load images from the camera with assistance from the Windows XP “Scanner and Camera Wizard”, select [Microsoft Scanner and Camera Wizard].

•Leaving the [Always use this program for this action] check box unchecked will cause the [Caplio 500SE] screen to be displayed each time you transfer images from the camera, thereby allowing you to choose whether to use [RICOH Gate La] or the [Microsoft Scanner and Camera Wizard] for image transfers.

•If your PC is installed with Windows XP Service Pack 2 and a warning message is displayed, see P.230.

Note ----------------------------------------------------------------------------------------------

• If the computer does not recognize the camera, uninstall the software (GP.140)	Downloading
and install it again.
• When downloading images from your camera, load a battery with adequate remaining
power in the camera. Use of the AC adapter (sold separately) is recommended.
• When transferring images to a computer using RICOH Gate La, the file being
transferred is renamed and saved.	Images
Downloading Images in Mass Storage Mode
	to
You can download images from the camera to a computer without
	Your
having to use software.
1 Change [USB CONNECTION] to [MASS STR] on the
	Computer
SETUP menu.
• For more details, see P.123. At the time of purchase, [ORIGINAL] is

selected.

2 Make sure that the camera power is off.		7
3	Connect the accessory USB cable to a USB port of your
	computer.

151