Ricoh 500SE manual 158

Using the Bluetooth® Function

8

5 Press the " button to select [PRINT], and then press the $ button.

•When the Bluetooth® function is used for the first time, a screen appears confirming whether to search for a destination device.

•If you have already searched for a destination device, a list of destination devices appears. Go to Step 7.

•If the camera is connected using a serial connection, a screen appears confirming whether to disconnect the serial connection. Select [YES] and press the MENU/OK button, and go to Step 7.

6 Press the $ button to select [YES] and then press the MENU/OK button.

•The camera begins searching for a destination device and a list of destination devices appears when the search is completed.

•By default, up to five devices can be discovered, but you can change this to

search for any number of devices between one and ten. (GP.176)

7 Press the !" buttons to select the desired destination device and then press the MENU/OK button.

•If the desired destination device is not listed, press the ADJ. button to search again for destination devices.

•Select a destination device and press

the $ button to display information about the destination device.

•To delete a destination device from the list, select the device and press the D (Delete) button.

158