Using the GPS Function

9

4 Press the !" buttons to select the desired destination device.

If the desired destination device is not listed, press the ADJ. button to search for a Bluetooth® GPS unit in your vicinity.

Select a destination device and press the $ button to display information about the destination device.

To delete a destination device from the list, select the device and press the D (Delete) button.

5 Press the MENU/OK button.

The connection status appears. Pressing the DISP. button cancels the operation.

If a passkey is required to connect to the destination device, a message appears prompting you to enter the passkey. (GP.162)

If the connection fails, an error message appears and then the shooting screen appears. For details about the error messages, see P.222.

When a connection is established to a

Bluetooth® GPS unit, the Bluetooth® antenna icon, GPS information and GPS antenna icon appear on the shooting screen.

Note ----------------------------------------------------------------------------------------------

The most recently connected destination device appears at the top of the list of destination devices.

Disconnecting serial connection

after manually connecting to a device -----------------------------------------------

Turn the camera off to disconnect serial connection.

182

Page 185
Image 185
Ricoh 500SE manual 182, Press the ! buttons to select the desired destination device