Sending One or All Still Images

1 Check that the destination device (computer) is turned on.

2 Press the 6 (Playback) button.

For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the Expanded Settings menu. (GP.193)

To send all still images, go to Step 4.

3 Press the #$ buttons to select an image to send. 4 Press the MENU/OK button.

• The Playback Setting menu appears.

5 Press the " button to select [FILE SEND] and press the $ button.

When the Bluetooth® function is used for the first time, a screen appears confirming whether to search for a destination device.

If you have already searched for a destination device, a list of destination devices appears. Go to Step 7.

If the camera is connected using a serial connection, a screen appears confirming whether to disconnect the serial connection. Select [YES] and press the MENU/OK button, and go to Step 7.

6 Press the $ button to select [YES] and then press the MENU/OK button.

The camera begins searching for a destination device and a list of destination devices appears when the search is completed.

By default, up to five devices can be discovered, but you can change this to

search for any number of devices between one and ten. (GP.176)

Using the Bluetooth® Function

8

167

Page 170
Image 170
Ricoh 500SE manual 167, Sending One or All Still Images, Press the button to select File Send and press the $ button