Display the Expanded Settings menu.
• For the operating procedure, see P.155.

Making Advanced Bluetooth® Settings

Registering an Authentication Passkey for a Device (PASS KEY)

The authentication passkey is a code used to authenticate two devices connecting using the Bluetooth® function.

If a passkey is required to connect to a destination device, the authentication passkey can be registered in the camera beforehand so that the passkey can be authenticated automatically when connecting to the device.

1

2 Press the " button to select [PASS KEY] and press the $ button.

• The keyboard screen appears.

3 Use the keyboard to enter the passkey set on the destination device.

For information on how to use the keyboard, see P.163.

To set the passkey on the destination device, see the documentation that came with the destination device.

4 Press the MENU/OK button.

Using the Bluetooth® Function

8

Note ----------------------------------------------------------------------------------------------

The maximum size of the passkey that can be entered with this camera is 16 alphanumeric characters.

If no authentication passkey is registered, the passkey must be entered when connecting the camera to the destination device. (GP.162)

Only one authentication passkey (for one destination device) can be registered. To connect to several devices at the same time (GP.177), the authentication passkey must be the same on all connecting devices.

To change a registered authentication passkey, enter a new passkey in Step 3 and

press the MENU/OK button.

175

 

Page 178
Image 178
Ricoh 500SE manual Making Advanced Bluetooth Settings, 175, Registering an Authentication Passkey for a Device Pass KEY