Ricoh 500SE manual Changing Image Confirmation Time LCD Confirm, 116

6

Changing Camera Settings

Changing Image Confirmation Time (LCD CONFIRM.)

Immediately after you press the shutter release button, the still image taken is displayed on the screen for a moment so you can check it. By default, the image confirmation time is set to 1 second, but this can be changed.

Available Settings

OFF (Image not displayed for confirmation) 0.5SEC.

1 SEC. *Default setting

2SEC.

3SEC.

To change the image confirmation time, follow the steps below.

1 Display the SETUP menu.

• For the operating procedure, see P.107.

2 Press the " button to select [LCD CONFIRM.] and press the $ button.

3 Press the !" buttons to select the desired setting.

4 Press the MENU/OK button, or

#button and press the MENU/ OK button.

Caution------------------------------------------------------------------------------------------

When [LCD CONFIRM.] is set to 0.5 seconds, symbols such as the zoom bar may remain on the monitor while the image is displayed.

116