Ricoh 500SE manual 208, Change the setting, After completing changes, press the MENU/OK button

Using the Wireless LAN Function (Only for Caplio 500SE-W)

10

6 Change the setting.

•Only alphanumeric characters can be entered with the keyboard screen. For information on how to use the keyboard, see P.163.

7 After completing changes, press the MENU/OK button.

•The display returns to the settings display screen.

•To edit other settings, repeat Steps 5 to 7.

8 Press the DISP. button.

•The display returns to the setup category display screen.

•To edit other setup categories, repeat Steps 4 to 8.

9 Press the DISP. button.

•The display returns to the [SEND TO] screen.

•To edit other destinations, repeat Steps 3 to 9.

10 After completing changes, press the MENU/OK button.

• The display returns to the Expanded Settings menu.

11 Press the MENU/OK button.

Caution------------------------------------------------------------------------------------------

•In Caplio Setting, if the [Cryptography]/[Authentication] on the [Wireless LAN] tab are set as follows (GP.196), [Cryptography/Authentication] is automatically set to [OFF/OPEN] when [Connection Method] in [W/LESS LAN] is set to [AD-HOC].

[AES]/[WPA-PSK], [AES]/[WPA2-PSK], [TKIP]/[WPA-PSK], [TKIP]/[WPA2-PSK]

•When [Cryptography/Authentication] in [W/LESS LAN] is changed on the camera, check the network key. (GP.197)

•If [Cryptography/Authentication] is set to [WEP/OPEN] or [WEP/SHARED], enter the [Network Key] as below.

[String]: Five characters or 13 characters

[Hex]: Ten characters or 26 characters

•If [Cryptography/Authentication] is set to [AES/WPA-PSK], [AES/WPA2-PSK], [TKIP/ WPA-PSK], or [TKIP/WPA2-PSK], enter an 8 to 63 character network key.

208