Bluetooth® related error messages

Error Message

Cause and Action

Refer to

REQUESTED FILE CANNOT

You attempted to send an image other than still ones (.JPG).

P.154

PRINT.

Only still images (.JPG) can be sent.

 

REQUESTED FILE CANNOT BE

You attempted to send an image other than still ones (.JPG).

P.154

SENT.

Only still images (.JPG) can be sent.

 

VERIFYING FAILED.

The input passkey did not match the destination device.

-

 

Enter the correct passkey.

 

 

The passkey was not entered within the time limit. Enter the

P.162

 

passkey again within the time limit.

 

CANNOT CONNECT.

At the start of transfer, the destination device could not be

P.154

 

connected due to one of the following causes. Check the

 

 

device status and start again from the beginning.

 

 

Signal no longer reach the destination device.

 

 

The destination device does not exist nearby (about

 

 

10 m).

 

 

The destination device is not active because the power is

 

 

off or due to other causes.

 

 

The destination device does not support the Bluetooth®

 

 

Profiles required for communication with this camera.

 

 

Inappropriate device was selected for the destination.

 

PRINTING FAILED.

Printing failed during transfer due to one of the causes

-

 

below. Check the device status and start again from the

 

 

beginning.

 

 

Signal no longer reach the destination device.

 

 

The destination device is not ready to print.

 

 

There is insufficient space on the destination device.

 

CANNOT SEND.

Transfer was interrupted by one of the following causes.

-

 

Check the device status and start again from the beginning.

 

 

Signal no longer reach the destination device.

 

 

The destination device can no longer receive a signal.

 

 

There is insufficient space on the destination device.

 

Appendices

11

222

Page 225
Image 225
Ricoh 500SE manual 222, Bluetooth related error messages