Ricoh 500SE manual 210, Sending One or All Files

Using the Wireless LAN Function (Only for Caplio 500SE-W)

10

Sending One or All Files

1 Check that the destination device (computer) is turned on.

2 Press the 6 (Playback) button.

•Check that [CHANGE COM] is set to [W-LAN] on the Expanded Settings menu. (P.193)

•To send all files, go to Step 4.

3 Press the #$ buttons to select a file to send. 4 Press the MENU/OK button.

• The Playback Setting menu appears.

5 Press the " button to select [FILE SEND] and press the $ button.

•If [SEND CONDITION] is set to [ON], the [SEND TO] screen appears.

•If [SEND CONDITION] is set to [OFF] (GP.219), go to Step 7.

•If the communication list has not been transferred, or if [SEND CONDITION]

is set to [OFF] (GP.219) and the destination setting is incorrect, an error message appears and the display returns to the Playback Setting menu.

•If the camera is connected using a serial connection, a screen appears confirming whether to disconnect the serial connection. Select [YES] and press the MENU/OK button.

6 Press the !" buttons to select the desired destination device and then press the MENU/OK button.

210