Ricoh 500SE manual 204, Click Transfer to Camera

Using the Wireless LAN Function (Only for Caplio 500SE-W)

10

14 Click [Transfer to Camera].

•A screen appears confirming whether to update the information set in the camera. Click [Yes] to update the information. Click [No] to cancel the update.

•After Step 10, if [Transfer to Camera] is clicked without clicking [Apply], a message appears confirming whether to save the edited setting. Click [OK] to save the edited setting. Click [No] to cancel the transfer of the communication list.

•Transfer of the communication list begins, and once the transfer is completed, a message indicating this appears.

15 Click [OK] on the message box.

16 Click [OK] on the [Caplio Setting] screen.

• Caplio Setting closes.

Note ------------------------------------------------------------------------------------

The settings made on the [Caplio Setting] screen (Detailed Setups and Communication List settings) are saved regardless of whether or not they are transferred to the camera or saved on the computer. When Caplio Setting is restarted, the last settings used are displayed.

17 Turn off the camera and disconnect the USB cable from the camera and computer.

• For disconnecting the USB cable, see P.153.

204