Caution------------------------------------------------------------------------------------------

When [USB CONNECTION] is set to [MASS STR], you cannot use RICOH Gate La to transfer camera data.

When [USB CONNECTION] is set to [MASS STR], files can only be read from the camera and cannot be written to or deleted from the camera.

When [USB CONNECTION] is set to [MASS STR], Direct Print may not be available for some printers. In such cases, select [ORIGINAL] instead.

To change the USB setting, follow the steps below.

1 Display the SETUP menu.

• For the operating procedure, see P.107.

2 Press the " button to select [USB CONNECTION] and press the $ button.

3 Press the !" buttons to select the desired setting.

4 Press the MENU/OK button, or

#button and press the MENU/ OK button.

6

Changing Camera Settings

Note ----------------------------------------------------------------------------------------------

For how to download images from the camera to a computer using the USB cable, see P.149-153.

124

Page 127
Image 127
Ricoh 500SE manual 124