Make sure that the camera is off.

Connecting the Camera to a Printer

Connect your camera to a printer using the USB cable provided.

1

2 Turn the terminal cover knob of the camera in the direction of the arrow to open the cover.

3 Connect your camera to a printer using the USB cable provided.

• Turn on the printer if it is not already on.

Caution------------------------------------------------------------------------------------------

Before opening or closing the battery/card cover or terminal cover, be sure to remove any water, sand or mud adhering to the camera, and avoid opening and closing the cover in places where such contaminants may get inside the camera.

Note ----------------------------------------------------------------------------------------------

To disconnect the camera from the printer, check that the power is off on both units before disconnecting the USB cable between them.

5

Direct Printing

99

Page 102
Image 102
Ricoh 500SE manual Connecting the Camera to a Printer