Farallon Communications PB 1400 appendix Connecting to the network, 10Base-T

8 Chapter 1

Connecting to the network

After the PB 1400 Ethernet Card is installed in your Macintosh, the next step is to connect it to your Ethernet network.

10Base-T

The PB 1400 Ethernet Card comes with a 10Base-T cable for connecting to a 10Base-T Ethernet network. Plug one end of the 10Base-T cable into the port on the card, and connect the other end to your Ethernet network.

Start up your Macintosh and check to see that the card's LED is lit. (The LED is on the card’s bracket next to the port.) A steady green light indicates that the card is receiving the link signal from the network.

Bracket on the PB 1400 Ethernet Card