Ricoh 500SE manual Sending Images in Shooting Mode, Quick Send Mode, 171

Sending Images in Shooting Mode

(QUICK SEND MODE)

Immediately after you shoot a still image, you can send that image to another device. This is convenient if you want to send images to a predetermined device.

You need to set [QUICK SEND MODE] on the Expanded Settings menu beforehand.

Caution------------------------------------------------------------------------------------------

You can only use the Bluetooth® function to send still images (.JPG). You cannot send movies (.AVI) or text (.TIF). If there are still images with sounds (.JPG and .WAV), only still images (.JPG) are sent.

Setting Up Quick Review Send (QUICK SEND MODE)

Available Settings
OFF *Default setting	Images are not sent in shooting mode.
1TOUCH	If images have previously been sent, you can automatically send an
	image to the same destination device by pressing the MENU/OK
	button after shooting while the image is displayed (GP.116).
	You cannot use Quick Review Send when connecting to a Bluetooth®-
	enabled device for the first time, using a serial connection, or using a
	wireless LAN connection (only for Caplio 500SE-W).
2TOUCH	If images have previously been sent, you can automatically send an
	image to the same destination device by pressing the MENU/OK
	button after shooting during quick review display (GP.46).
	When connecting to a Bluetooth® device for the first time, the image is
	sent after discovering the destination device.

1 Display the Expanded Settings menu.

•For the operating procedure, see P.155.

•For Caplio 500SE-W, check that [CHANGE COM] is set to [BT] on the Expanded Settings menu. (GP.193)

2 Press the " button to select [QUICK SEND MODE] and press the $ button.

3 Press the !" buttons to select [1TOUCH] or [2TOUCH].

4 Press the MENU/OK button, or

#button and press the MENU/ OK button.

Using the Bluetooth® Function

8

171