Paradyne 3160-A4, 3161, and 3165-A4 Setting the 10BaseT Port Subnet Mask

4. Configuration
3160-A2-GB24-10 March 2001 4-11
9. When you are through changing the IP address, you must press F3 (Save) to
save the value. Otherwise, the original value will be retained.
Setting the 10BaseT Port Subnet Mask
The subnet mask for the 10BaseT port IP address is set automatically acc ording
to the class of the IP address. It can also be set manually in a fashion similar to the
IP address. See
Setting the 10BaseT Port IP Address
on page 4-10 for complete
instructions.
Procedure
To change the subnet mask for the 10BaseT port IP address:
1. From the Edit screen, press the key until the User selection appears on the
screen.
2. Select User.
3. Press F1 (Next) until the ENET NetMask configuration option appears.
4. Press F2 (Edit) to edit the subnet mask.
5. Use the and keys to position the cursor under the digit you want to
change. Press F1 (Up) to increment the digit or F2 (Down) to decrement the
digit.
6. When you are through changing the subnet mask, you must press F3 (Save)
to save the value. Otherwise, the original value will be retained.
F1 F2 F3
010.155.111.222
Up Down Save
F1 F2 F3
Edit:
User Alarm Mgmt
F1 F2 F3
ENET NetMask:
Next Edit Clear
F1 F2 F3
255.255.240.000
Up Down Save