Paradyne 3160-A4, 3161, and 3165-A4 Setting a Password

5. Security
3160-A2-GB24-10 March 2001 5-3
Setting a Password
In addition to establishing access security on a port (refer to the previous secti on,
Establishing Access Security on a Port
on page 5-2) the password itself is set.
Unless you specify otherwise, the password is null.
Procedure
To set a password:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the key until the Passwd selection appears
on the screen.
4. Select Passwd.
5. Use the and keys to position the cursor under the desired character.
You must enter a character before the moves the cursor to the next space
to the right.
6. Enter the desired password. Press F1 (Up) and F2 (Down) to scroll up and
down through the valid characters/numbers for the password. Valid password
characters are 0–9, a–z, A–Z, #, –, ., and /. Press F3 (Save) to save the
password.
F1 F2 F3
Control:
Reset CID Passwd
F1 F2 F3
Passwd:
xxxxxxxx
Up Down Save
F1 F2 F3
Passwd:
xxxxxxxx
Up Down Save