C. Configuration Options

Table C-2. Port Configuration Options (2 of 5)

Net DCLB: Disab (Factory 1)

Both (Factory 2)

Next Disab V.54 FT1

Both Prev

 

 

Network Initiated DCLB. Allows the initiation and termination of a Data Channel Loopback (V.54 loop 2) by the receipt of a V.54 DCLB-actuate sequence or DCLB-release sequence from the network or far-end device. The sequences may be either V.54 or FT1 (ANSI) compliant sequences.

Disab – Ignores the DCLB-actuate and DCLB-release sequences for this port.

V.54 – Enables DCLB-actuate and DCLB-release sequences that comply with the V.54 standard for “Inter-DCE signaling for point to point circuits.”

FT1 – Enables DCLB-actuate and DCLB-release sequences that comply with the ANSI T1.403, Annex B standard for “In-band signaling for fractional-T1 (FT1) channel loopbacks.”

Both – Enables DCLB-actuate and DCLB-release sequences that comply with either the ANSI or V.54 standard. The type of actuate and release sequences do not have to match.

Port LB: Disab (Factory 1) Both (Factory 2)

Next Disab DTLB DCLB Both Prev

Port (DTE) Initiated Loopbacks. Allows the initiation and termination of a local Data Terminal Loopback (DTLB) or remote Data Channel Loopback (DCLB) by the DTE connected to this port. (DTLB is equivalent to a V.54 loop 3, and DCLB is equivalent to a V.54 loop 2.) Control of these loopbacks is through the DTE interchange circuits as specified by the V.54 standard.

Disab – Disables control of local DTLBs and remote DCLBs by the DTE connected to this port.

DTLB – Gives control of the local DTLBs for this port to the DTE attached to this port. This loopback is controlled by the Local Loopback interchange circuit LL (CCITT 141).

DCLB – Gives control of the remote DCLBs for the far-end port connected to this port to the DTE attached to this port. This loopback is controlled by the Remote Loopback interchange circuit RL (CCITT 140). The far-end equipment must support in-band V.54 loopbacks.

Both – Gives control of local DTLBs and remote DCLBs to the DTE connected to this port.

All Ones: Both

Next Disab DTR RTS Both Prev

Send All Ones on Data Port Not Ready. Specifies the conditions on the data port that determine when valid data is not being sent from the DTE. When this condition is detected, all ones are sent to the network on the DS0 channels allocated to the port.

Disab – Disables the monitoring of interchange circuits from the DTE connected to this port.

DTR – Monitors the DTE Ready interchange circuit CD (CCITT 108/1/2). When DTR is interrupted, all ones are sent to the network.

RTS – Monitors the Request-to-Send interchange circuit CA (CCITT 105). When RTS is interrupted, all ones are sent to the network.

Both – Monitors both DTR and RTS. If either is interrupted, all ones are sent to the network.

NOTE: If the Port Type configuration option is set to X.21, set this configuration option to RTS or Disab.

C-4

March 2001

3160-A2-GB24-10

Page 169 Page 171
Page 170
Image 170
Paradyne 3161, and 3165-A4, 3160-A4 Table C-2. Port Configuration Options 2, All Ones Both Next Disab DTR RTS Both Prev
Page 169 Page 171

3160-A4, 3161, and 3165-A4 specifications

Paradyne, a renowned name in the telecommunications industry, has made significant strides in providing networking solutions tailored for various business needs. Among its notable products are the Paradyne Series 3165-A4, 3161, and 3160-A4, which are designed to enhance connectivity and performance in voice and data communication.

The Paradyne 3165-A4 is a high-performance multi-service access platform that supports various communication technologies. One of its defining features is its ability to facilitate both DS1 and ISDN BRI interfaces, offering flexibility in deployment based on the customer’s existing infrastructure. This model excels in providing reliable, high-speed data transmission, making it ideal for businesses that rely on consistent and robust connectivity. The 3165-A4 also includes advanced error correction capabilities, ensuring the integrity of data during transmission, which is crucial for maintaining quality in voice communications.

Moving on to the Paradyne 3161, this unit stands out for its compact design and energy efficiency. It supports multiple T1/E1 interfaces, catering to businesses that require versatile connectivity options. The 3161 is particularly well-suited for small to medium-sized enterprises looking for cost-effective solutions without compromising on quality or performance. Its built-in management tools enable easy monitoring and troubleshooting, ensuring minimal downtime and swiftly addressing any connectivity issues that may arise.

Lastly, the Paradyne 3160-A4 offers a compelling combination of features geared towards enhancing data communication. This model is engineered to handle high-speed Ethernet connections, enabling businesses to leverage fiber and DSL technologies effectively. One of the key characteristics of the 3160-A4 is its scalability, allowing organizations to expand their network capabilities as their demands grow. Additionally, it incorporates advanced security protocols, protecting sensitive data and ensuring compliance with industry regulations.

All three models, 3165-A4, 3161, and 3160-A4, are built with reliability and performance in mind, using state-of-the-art technologies that cater to the evolving needs of modern telecommunications. Businesses seeking efficient, scalable, and secure networking solutions can greatly benefit from Paradyne’s offerings, which have been designed to meet the rigorous demands of today's digital landscape. Whether for voice, data, or combination services, Paradyne's products deliver the performance and reliability necessary for successful business operations.
Top Page Image Contents