4. Configuration
4-20 March 2001 3160-A2-GB24-10
NOTE:
Steps 9 and 10 describe the process for entering text strings for Mgmt
configuration options. This process applies to entering any text strings into
Mgmt configuration options.
9. Use the and keys to position the cursor under the character you want
to change. Press F1 (Up) or F2 (Down) to scroll through the valid
numbers/characters for the text string.
The F1 (Up) key scrolls through the ASCII character set in the following order:
numbers (0–9), lowercase letters (a–z), uppercase letters (A –Z), s pace
character, ASCII symbols (ascending order, based on ASCII code), and the
End of Line symbol (←). The ← erases all characters to the right of the cursor.
10. When you are through changing the c ommunity name, you must press F3
(Save) to save the value. Otherwise, the original value will be retained.
11. Press F1 (Next) until the Access 1 c onfiguration option appears.
12. Press F2 (Read) or F3 (R/W).
The Read selection allows read-only access (SNMP “Get”) to the accessible
objects in the MIB when community name 1 is used. The R/W selection allows
Read/Write access (SNMP “Get” and “Set”) to the objects in the MIB. Write
access is allowed for all objects specified as read/write in the MIB. Read
access is allowed for all objects specified as read-only or read/write.
F1 F2 F3
public
Up Down Save
F1 F2 F3
Access 1:
Next Read R/W