Philips HDR1000/01 specifications Initial Settings

INITIAL SETTINGS

INITIAL SETTING

Before turning on your HDR1000, make sure batter- ies are in the remote control and the HDR1000 and TV are connected correctly.

If you have connected the HDR1000 to the TV set without a scart cable

		Save the data.		Language
			Language	English
			Country	Netherlands
• Confirm that “Store” is
	selected.
	Then, press OK button.				Store

English

Connect the mains cord.

• Connect the mains cord into the wall socket.

Turn on the TV. Set it to video program (TV channel 36 / frequency 591 MHz).

•Please look in the instruction book of your TV how to tune and add a program.

•If the TV channel 36 / frequency 591 MHz is used for broadcasting, or interference lines appear on the picture. Details are on page 23.

Press HDD but- Language		Language
		English
ton, then, press	Country	Netherlands
STANDBY but-		Store
ton.

• After around 15 seconds, the HDR1000 will turn on

Press OK button to start Auto Search.

•Wait until the status bar reaches 100%. It will take up to 15 minutes. When this is complete, “Clock” menu will appear on the screen. Go to step [9].

•If “No TV signals found.” appears on the TV screen after Auto Search, press RETURN button, then, go to step [9]. After that you can install pro- grams as described on page 21.

Press OK for Auto Search

or

Press PLAY to skip Auto Search

Auto Search

Please wait

0% 100%

Stop : CLEAR

and the language set up display will appear. (If the

display does not appear, check your connections.)

Move the cursor		Language
to setting posi-	Language	English
	Country	Netherlands
tion.
• Press B button to move
			Store
the cursor.

Select your desired Language for the on-screen menu.

• Press K or L button to		Language
select your desired lan-
	Language	English
guage.	Country	Netherlands
Then, press B button
twice to move the cursor.			Store

Continue with step [4] on next page to set the clock.

If you have connected the HDR1000 to the TV set with a scart cable

Connect the mains cord.

•Connect the mains cord into the wall socket.

Set the TV to line input mode.

•Please refer to your TV owner’s manual for details.

•If you don’t have clear picture or sound interference despite optimisation, you can switch off the built-in modulator. Details are on page 23.

Continue with step [3] on left side in

Select Country.

•Press K or L button to select the country where you live.

Then, press B button to move the cursor.

Language

Language English

Country Netherlands

Store

this page for the initial setting.

Helpful Hints

•Once you have stored the initial setting, the HDR1000 stores it after you turn off the power.

•You need to set up the on-screen language of HDD and DVD separately. Details are on page 44.

•To skip Auto Search feature at step [8], press PLAY button. Programs will not be programmed.

•The TV channels / frequencies are stored under the program numbers.

– 15 – EN / 2A01