ENGLISH
Setting the CAM : Adjusting Date/Time
Setting Date
The
1.Move [POWER/MODE Selector] down to turn on the CAM.
◆The Video Record screen appears.
2.Move [POWER/MODE Selector] down again to select System Settings mode and press the [OK] button.
◆The system is automatically converted into the selected mode in two seconds even when the [OK] button is not pressed.
◆The System Settings menu appears.
3.Move the [W/T] button to select <Date /Time> and press the [√] button.
4.Move the [W/T] button to select <Set Date> and press the [OK] button.5.Move the [W/T] button to set date and press the [OK] button.◆Move the [W/T] button to change the setting and press the [√] button to move to the next setting. Press the [OK] button to confirm selection.
Notes
✤If you select [œ ] button in the menu, the previous menu appears.
✤After you finish setting, press the [Record/Stop] button to exit from the menu screen.
✤Date and Time are recorded information. They are not displayed on the LCD monitor.
✤You can set Year up to 2037.
2 | System Settings | F / 720i |
|
00:00:00 / 00:43:41 STBY
3 System Settings
System
DisplayDisplay
Date/Time
System
Memory
LanguageLanguageEnglishEnglish
4 Settings: Date/Time/Time
| System |
SetSet TimeTime | 12:00:0012:00:00 AM |
Set Date | 2005/01/01 |
Date Format | YY/MM/DD |
Timeime Format | 12 Hour |
Back |
|
5 Settings: Date/Time/Time
System
2005 / 1 / 1
Press Up/Down to change and
OK to confirm selection
93