ENGLISH

Setting the CAM : Using USB Mode

Transferring files to a computer

1.Connect the CAM to the PC with the USB cable.

2.Move [POWER/MODE Selector] down to turn on the CAM.

◆USB mode screen appears automatically.

3.Move the [W/T] button to select <Mass Storage> and press the [OK] button.

◆Your PC doesn't recognise the USB device automatically. You may install the USB Driver manually on Windows 98SE operating system.

4.Disconnect the USB cable if you finish transferring.

USB Mode

Mass Storage

PC-Cam

PictBridge

Notes

✤If you disconnect the USB cable from the PC or the CAM during the data transfer, the data transfer will stop and the data may be damaged.

✤If you connect the USB cable to a PC using a USB HUB or with other device at the same time, it might cause conflict and may not work properly. If this occurs, remove all other devices and try the connection again.

✤If the CAM does not recognise the USB device when the USB cable is connected to USB Port on the front panel of the PC, connect the USB cable to USB Port on the rear panel of the PC.

106