ENGLISH
Setting the CAM : Setting the System
Setting the Demonstration Function
Demonstration function will allow you to view all the functions that the CAM supports.
1.Move [POWER/MODE Selector] down to turn on the CAM.
◆The Video Record screen appears.
2.Move [POWER/MODE Selector] down again to select System Settings mode and press the [OK] button.
◆The system is automatically converted into the selected mode in two seconds even when the [OK] button is not pressed.
◆The System Settings menu appears.
3.Move the [W/T] button to select <System> and press the [√] button.
4.Move the [W/T] button to select <Demonstration> and press the [√] button.5.Move the [W/T] button to set the desired setting and press the [OK] button.
◆Off: Cancel the Demonstration function.
◆5 Minutes: Start the Demonstration function in 5 minutes.
◆Play Now: Start the Demonstration function now.
Notes
✤If you select [œ ] button in the menu, the previous menu appears.
✤After you finish setting, press the [Record/Stop] button to exit from the menu screen.
✤If you set the Demonstration function, it operates only in Video Record mode.
2 | System Settings | F / 720i |
|
00:00:00 / 00:43:41 STBY
3 System Settings
System
DisplayDisplay
Date/TimeDate/Time
System
Memory
LanguageLanguageEnglishEnglish
4 Settings : System
| System |
AutoAuto ShutShut offoff | 55 MinutesMinutes |
Demonstration | Off |
Videoideo Mode | |
File No. | Reset |
Beep Sound | On |
5 Settings : System
| System |
AutoAuto ShutShut offoff | 55 MinutesMinutes |
Demonstration | 5 Minutes |
Videoideo Mode | |
File No. | Reset |
Beep Sound | On |
97