![](/images/new-backgrounds/1046058/46058333x1.webp)
Configuring Advanced Video Loss-Activated Relay Output
To configure an advanced video
1.On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2.In the Setup dialog box, click Schedule button . The Schedule page is displayed.
3.Click the Configure Relays button. The Configure Relays dialog box opens.
4.Click the Video Loss tab if it is not already selected.
5.Configure each relay that is linked to an alarm:
a.Click the
b.Select a relay time value from the Activation Period
5a
5b
| Figure 139. Linking Relays to Video Loss |
Table AO describes the available video | |
| Table AO. Video |
|
|
Option | Result |
|
|
Disable | Relay will not activate when a video loss event occurs. |
|
|
Follow Event | Relay will activate at the exact moment the video loss event happens. |
|
|
1, 3, 5, 10, 15, and 20 Seconds | Sets the amount of time the relay will remain active after the video loss event occurs. |
|
|
167 |