![](/images/new-backgrounds/1046058/46058385x1.webp)
Creating an ATM/POS Exception
To create an ATM/POS exception:
1.In the Network page, click the Port/Device tab. The Port/Device page is displayed.
2.In the Communication Port
3.In the selected device
4.In the Communication Port Configuration section, click Configure. The Device Configuration page is displayed.
5.Click the Advanced tab. For information about the Advanced page, refer to Setting Up ATM/POS Exceptions on page 191.
6.In the ATM/POS Name
Figure 154. Advanced Page
193 |