Sending
To cause
1.On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2.Click the Notification button . The Notification page is displayed.
3.Click the Emergency
4.In the Notification Items section, do the following:
a.Click the Video Loss check box.
b.In the Selected Channels field, click once to the right of the words Video Loss. The Selected Channels dialog box opens.
c.Do one of the following:
•Click the check box for each channel you want to monitor for video loss detection events.
•Click Select All to monitor all channels for video loss detection.
•Click Deselect All to deselect all channels.
5.Click OK.
6.Click Apply.
SETTING UP E-MAIL NOTIFICATION GROUPS
The DX8100 allows you to set up groups to send an emergency notification to multiple users. The DX8100 supports the following:
•You can create up to 32
•Up to 32 members can be assigned to each
•A group can be notified in response to an alarm or motion detection event.
This section describes how to set up
•Adding an
•Modifying an
•Deleting an
•Adding Members to an
•Deleting Members from an
•Modifying
Adding an E-mail Notification Group
To add an
1.On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.
2.Click the Notification button . The Notification page is displayed.
3.Click the Emergency
4.In the Mail Group area, do the following:
a.Click Manage Groups. The Group Management dialog box opens.
b.Click Add Group. The Manage Groups dialog box opens.
c.Enter the name of the group. (Group names can be up to 32 characters in length and can include spaces, but not special characters.)
5.Click OK.
6.Click Close.
7.Click Apply.
243 |