Pelco dx8100 manual Searching by POS Transaction Number

Models: dx8100

1 264
Download 264 pages 29.19 Kb
Page 87
Image 87

6. Use the playback control to stop or pause playback, reverse playback, and so forth.

￿

￿ ￿

Figure 52. Display a POS Transaction Search by Device Name

SEARCHING BY POS TRANSACTION NUMBER

The DX8100 allows you to search for a POS event by transaction number. You must specify the channel, date, and a time window in which the transaction is recorded.

To search for a POS event by transaction number:

1. On the DX8100 toolbar, click the Search button .

2. On the Search control, click the POS Search button

. The POS search view is displayed.

3.To select a device name, do one of the following:

In the DX8100 Site Tree, click a camera that is linked to an ATM/POS device.

By default, the name of the ATM/POS device linked to the selected camera/channel is displayed in the Device Name box. In this case, the Device Name box is deselected.

In the Transaction Information section, click the check box to select Device Name. When the Device Name box is enabled, type the ATM/POS device name in the box.

4.Set the date and time range you want to search for the transaction number.

5.In the Transaction Information section, click the check box to select Transaction Number. The Transaction Number box is available.

6.In the Transaction Number box, type the transaction number.

7.Click Start Search. If the channel, date, time, and transaction number are valid, the POS transaction is displayed in the POS Search Table.

8.In the POS Search Table, click a transaction entry. The transaction data is displayed in the Data window.

C2630M-C (7/09)

87

Page 87
Image 87
Pelco dx8100 manual Searching by POS Transaction Number, Transaction Number box, type the transaction number