3.To select a ATM/POS device, do one of the following:
•In the DX8100 Site Tree, click a camera that is linked to the ATM/POS device.
By default, the name of the ATM/POS device linked to the selected camera/channel is displayed in the Device Name box. In this case, the Device Name box is deselected.
•In the Transaction Information section, click the check box to select Device Name. When the Device Name box is enabled, type the ATM/POS device name in the box.
4.Set the date and time range for the search.
5.In the Data Information section, do the following:
a.Click the check box to select Action Code. The Action Code
b.In the Action Code
For information about action codes, refer to Using Action Codes on page 192.
6.Click Start Search. If the device name/channel, date, and time are valid, transactions containing the line item are displayed in the POS Search Table.
7.In the POS Search Table, click a transaction. The transaction data is displayed in the Data window.
3b
5a
5b
Figure 57. Searching Transactions by Action Code
92 |
