Pelco dx8100 manual Setting UP Auto Reboot, Specifying the Data Retention Time Limit

SETTING UP AUTO REBOOT

The DX8100 allows you to select the day and time for the server to perform an automatic reboot. If there are mapped network drives, the Windows feature requires that the password be entered at the Enter Network Password dialog box. In this case, the DX8100 application will not start until the password is manually entered.

NOTE: The DX8100 will not automatically reboot if there are mapped network drives.

To enable the Auto Reboot feature:

1.On the DX8100 toolbar, click Setup button . The Setup dialog box opens to the Camera page.

2.Click the System button . The System page is displayed.

3.In the Auto Reboot section, click the Enable check box.

4.In the Auto Reboot section, do the following to specify the day and time to automatically reboot the system:

a.Select the day of the week in the drop-down box.

b.In the Hour drop-down box, select the hour. Time is displayed in 24-hour clock format.

c.In the Minute drop-down box, select the minutes.

5.Click Apply.

SPECIFYING THE DATA RETENTION TIME LIMIT

The DX8100 data retention time setting allows the Administrator user to configure a time limit for viewable recorded video. The time limit can be entered manually or selected from the drop-down menu lists. The data retention time is set in increments of one or more days. The viewing time limit window starts from the date of recording to the configured time limit. For example, if the time limit is set for 11 days, all video recorded on Aug. 24, 2006 can be viewed up to and including September 4, 2006. The data recorded on Aug. 24 cannot be viewed on Sept. 5. The video data recorded on Aug. 24 is not be deleted; it is just not available for viewing.

If the Administrator sets the retention time to unlimited or to a time later than the current retention time limit, all video data (if the retention time is set to Unlimited) or data within the newly set retention time limit can be viewed.

To set the data retention time limit:

1.On the DX8100 toolbar, click Setup button . The Setup dialog box opens to the Camera page.

2.Click the System button . The System page is displayed.

3.In the Data Retention Time Limit area, select a retention time limit from the drop-down list.

Figure 173. Data Retention Time Limit Entered Manually

4.Click Apply. The Shut Down dialog box opens, prompting you to restart the DX8100.

5.Do one of the following:

•To restart the DX8100 to use the new settings, click Yes. The DX8100 restarts.

•To cancel the new settings, click No. The current time limit setting is restored and the system does not restart.

C2630M-C (7/09) 227