7. Verify that the IP camera resolution is displayed in the Site Tree and Channel Information area.
Figure 96. Viewing IP Camera Settings
8.In the Site Tree, click the IP camera. The IP camera video is displayed in the Camera page preview window.
9.Verify that the CPU (orange) and Memory (blue) levels are within the DX8100 Resource Meter’s 0 to 100 percent range. If either level exceeds 100 percent, a warning dialog box appears.
Click the check box to disable future DX8100 System Resources Warning dialog boxes. If the unit is restarted, the DX8100 System Resources Warning dialog box is enabled again.
Figure 97. DX8100 System Resources Warning Dialog Box
To configure the analog and IP cameras to bring the CPU or Memory level within range:
a.(Optional) Click the check box to disable the DX8100 System Resources Warning dialog box.
b.Go to Configuring Analog and IP Cameras for Optimal Hybrid Video Recording on page 130.
10.Verify that the IP camera is communicating with the DX8100. Click IP Camera Status. The IP Camera Network Status dialog box appears and displays the IP camera’s status.
11.Click OK.
12.Click Apply.
13.On the DX8100 toolbar, click the Setup button 
. The DX8100 application window appears.
14.Drag the newly configured IP camera to a camera pane.
128 |
|
