Pelco dx8100 manual Setting Up ATM/POS Exceptions, Assigning a Data Format to an ATM/POS Device

e.Do one of the following:

•Click Apply to confirm selection and remain in the Device Configuration dialog box.

•Click OK to confirm selection and return to the Port/Device page.

5b

5a

5c

Figure 153. Assigning a Data Format to an ATM/POS Device

Setting Up ATM/POS Exceptions

An exception is a predefined transaction filter used to detect a specific data structure within the ATM/POS transaction data. Exceptions are configured on the Advanced page.

To use an exception to search transaction data, the exception must be created, before recording the transaction data. If the transaction data is recorded before the exception filter is defined, the exception filter will not find the data structure within the transaction data.

The DX8100 allows you to configure unique exceptions for each ATM/POS device from the following:

•ATM/POS device selection drop-down box

•Exception table that contains the name and effect of each exception you create

•Action code drop-down box that contains exception action codes

•User mapping table where you create the string for the action code

Use the Advanced tab to configure exceptions. Entries are case sensitive. For each defined data device ATM device or POS terminal, you can specify up to 31 data exceptions. A field left blank is not used in the exception. Any fields containing values must all be found or satisfied before a data device exception is generated. Each data device can trigger the DX8100 to record at special rates and for a special length of time, as determined in the Record On Data Exceptions screen.

This section describes how to work with exceptions and includes the following topics:

•Using Action Codes

•Creating an ATM/POS Exception on page 193

•Editing an ATM/POS Exception on page 195

•Deleting an ATM/POS Exception on page 195

•Assigning an Exception to An ATM/POS Device on page 196

C2630M-C (7/09) 191