Pelco dx8100 manual Manual assignment, Automated assignment

1.On the DX8100 toolbar, click the Setup button . The Setup dialog opens to the Camera page.

2.Click IP Camera Properties. The IP Camera Properties dialog box appears.

3.To assign an IP camera to a camera channel, do one of the following:

•Manual assignment:

(1)Click a check box to select a camera.

(2)Click the Manufacturer drop-down box and select a manufacturer. The port number, compression method, and video stream settings automatically appear in the camera row.

Figure 91. Manually Entering IP Camera Data

(3)Click the IP drop-down box and enter the camera’s IP address.

Figure 92. Manually Entering IP Camera Data

•Automated assignment:

(1)Click Scan. Available IP devices appear in the Scan table.

(2)Click a supported IP camera.

(3)Click the Add button . The Connect dialog box opens.

(4)In the Connect drop-down box, click a camera.

(5)Click Apply. The selected camera is assigned to the designated camera channel.

Figure 93. Automated Assignment of an IP Camera

C2630M-C (7/09) 125