PTZ PRESETS
A preset is a
The PTZ controls are hidden in the extended view mode. In this case, select the standard view mode to display the PTZ controls.
To switch between the standard and extended view mode:
•From the DX8100 menu bar, choose View > Extended View.
For information about changing view modes, refer to Switching Between Standard and Extended Panel Views on page 30.
The following PTZ operating guidelines must be observed:
•To program or clear presets, preset tours, and patterns, the 
button must be engaged.
•To activate presets, tours, and patterns, the 
button must be disengaged.
This section describes how to program, activate, and clear presets and includes the following topics:
•Programming a Preset
•Activating a Preset on page 54
•Clearing a Preset on page 55
PROGRAMMING A PRESET
This section describes how to program a preset. The following PTZ operating guidelines apply:
•Clicking the 
button places DX8100 in PTZ programming mode.
•While in PTZ programming mode, multiple presets can be programmed until the 
button is pressed again. To program a PTZ preset:
1.On the DX8100 toolbar, click the Live button 
.
2.Drag a camera from the Site Tree onto a view panel.
3.On the PTZ keypad, click the Set button 
.
4.Using the
EXIT
Figure 22. Creating a Preset
| 53 |
