Pelco dx8100 manual Configuring Advanced ATM/POS-Activated Relay Output

Configuring Advanced ATM/POS-Activated Relay Output

To configure an ATM/POS-activated relay output:

1. On the DX8100 toolbar, click the Setup button . The Setup dialog box opens to the Camera page.

2. In the Setup dialog box, click Schedule button . The Schedule page is displayed.

3.Click the Configure Relays button. The Configure Relays dialog box opens.

4.Click the ATM/POS tab if it is not already selected.

5.Configure each relay that is linked to an ATM/POS:

a.Click the drop-down box to select a relay.

b.Select a relay time value from the Activation Period drop-down box.

￿5a

5b

Figure 138. Linking Relays to ATM/POS

Table AN describes the available ATM/POS-activated relay options.

Table AN. ATM/POS-Activated Relay Settings

Option	Result
Disable	Relay will not activate when the ATM/POS event occurs.
Follow Event	Relay will activate at the exact moment the ATM/POS event occurs.
1, 3, 5, 10, 15, and 20 Seconds	Sets the amount of time the relay will remain active after the ATM/POS event occurs.

166 C2630M-C (7/09)