Pelco dx8100 manual KBD300A Shift Key Mode Features, Left/right direction

KBD300A SHIFT Key Mode Features

The KBD300A SHIFT key allows you to control certain DX8100 operation features in the Site Tree from the keyboard.

This section describes the KBD300A SHIFT key features. The SHIFT key is effective within the DX8100 Site Tree. You can move the cursor to select elements within the Site Tree, expand and collapse elements, and select the display division. For detailed information about how to operate the KBD300A, refer to KBD300A Universal Keyboard Installation/Operation manual. For information about configuring DX8100 data communication settings for the KBD300A, refer to Setting Up the KBD300A Keyboard on page 198.

Table S describes the KBD300A SHIFT key features specific to the DX8100 server.

			Table S. KBD300A Shift Key Features
Keyboard Control	Action
Joystick	Activity within the DX8100 Site Tree:
	•	Up/down direction: Moves the cursor vertically through each element in the Site Tree.
			An element is a DX8100 site, camera within each DX8100 site, or Alarm, ATM/POS, and relay within each
			DX8100 site.
			If an element is expanded, the joystick moves the cursor vertically through the objects of that element.
	•	Left/right direction:
		–	Right: Expands an element to display objects contained under the element.
		–	Left: Collapses an element and hides its objects. Select a camera/unit at the tree.
Number + CAM	Expands the Site Tree and selects the first camera in each DX8100 site. For example, if there are two sites with one
	named DX8100 site 1 and the other named DX8100 site 2:
	•	Pressing 1 + CAM expands the Site Tree for DX8100 site 1 and selects the first camera. It does not assign the
		selected camera to a view pane or display video.
	•	Pressing 2 + CAM expands the Site Tree for DX8100 site 2 and selects the first camera. It does not assign the
		selected camera to a view pane or display video.
F2, F3, ON, OFF	Cameras are assigned numerically 1–16 to the respectively numbered video. These controls display DX8100 video
	in the following divisions:
	•	F2/OFF: Single-division view
	•	F3/MOM: 4-division view
	•	AUX ON: 9-division view
	•	AUX OFF: 16-division view
	Repeatedly pressing a button causes the DX8100 to cycle through the display of the remaining panels.

To place the KBD300A in the shift mode:

•On the KBD300A keyboard, press the SHIFT key. The LED indicator should be on.

C2630M-C (7/09) 67