Linking a Relay Output to a Camera
The DX8100 allows you to link relays to a camera.
•You can link multiple relays a single camera.
•You can also link a single relay to multiple cameras.
The DX8100 allows you to link relays to cameras by dragging them onto individual camera view panes or onto cameras listed in the Site Tree.
To link a relay output to a camera:
1.On the DX8100 toolbar, click the Live button 
.
2.In the Site Tree, click the plus sign (+) next to the camera to which you want to link relays.
3.Click the plus sign (+) next to 
to see the list of relay outputs.
4.Drag a relay onto a camera pane or a camera listed in the Site Tree.
Linking Relay Outputs to Alarm Inputs
To link a relay output to an alarm input:
1.On the DX8100 toolbar, click the Live button 
.
2.In the Site Tree, click the plus sign (+) next to 
to expand the Alarm tree if needed.
Relays can also be linked to cameras and alarms on the Link settings page. For more information, refer to Configuring Basic Relay and Alarm Settings on page 132.
3.Click the plus sign (+) next to 
to expand the Relay tree if needed.
4.Drag a relay output onto an alarm input in the Site Tree.
REMOVING LINKS
This section describes how to remove links and includes the following sections:
•Removing a Linked Alarm Input from a Camera on page 40
•Removing a Linked Relay Output from a Camera on page 40
•Removing a Linked Relay Output from an Alarm Input on page 41
Removing a Linked Alarm Input from a Camera
To remove an alarm link from a camera:
1.On the DX8100 toolbar, click the Live button 
.
2.In the Site Tree, click the plus sign (+) next to the camera from which you want to remove an alarm input.
3.Left click and drag the alarm outside the Site Tree panel, and then release the mouse button.
4.Repeat the above process for each alarm you want to remove.
Removing a Linked Relay Output from a Camera
To remove a relay link from a camera:
1.On the DX8100 toolbar, click the Live button 
.
2.In the Site Tree, click the plus sign (+) next to the camera from which you want to remove the relay output.
3.Left click and drag the relay outside the Site Tree panel to the DX8100 toolbar or panel (above or below the Site Tree panel), and then release the mouse button.
4.Repeat the above process for each relay you want to remove.
40 |
