Magnavox VRZ362AT owner manual Recording, Turn on the TV and set it to channel 3 or 4, whichever

VRZ362comb.QX33 4/7/99 8:26 PM Page 32

32 Recording

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever the

1Turn on the TV.

2Insert a tape in the VCR.

CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact in the VCR.

3

Press the VCR button.

4

If the VCR light appears on the display panel, go to step 5. If the

VCR light does not appear, press the VCR/TV button once.

5

Press the SPEED button until the desired tape speed appears briefly on-screen. (Details about tape speed are on page 37.)

6

	POWER
4	VCR/TV		SPEED
	REC/OTR
7			PLAY
	REW		STOP
	MENU	STATUS/EXIT
	1	2	3
	4	5	6
	7	8	9
3	MUTE	0	+100
	VCR	TV	CBL/DBS
			VCR PLUS+
	VAR.SLOW		/ENTER
	TRACKING		F.ADV

EJECT

MEMORY

PAUSE/STILL

F.FWD

CLEAR

CH.

VOL.

SLOW

X2 PLAY

5

8

9

6

Use the CH(annel) o/p buttons or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button once to start recording. The REC light will appear.

8

To pause the recording, press the PAUSE/STILL button once. The REC light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC light will come on again.

9

To stop recording, press the STOP/p button.

QUICK TIME INDEX REC END SKIP

SEARCH

Helpful Hints

•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on- screen.

•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash on-screen.

•Other recording options are on pages 33 - 44.

•You can change the tape speed during a recording, but some distor- tion will appear on the tape.

•The VCR will record in a preset vol- ume.