Magnavox VRZ362AT owner manual Timer Recording With the VCR Plus+ Programming System

VRZ362comb.QX33 4/7/99 8:27 PM Page 42

42 Timer Recording With the VCR Plus+ Programming System

Follow these steps to set a timer recording with the PlusCode programming numbers in your TV guide. Before you begin:

●Set up the channels at the VCR (page 12).

●Set up the VCR Plus+ and Cable/TV channel numbers (pages 40 - 41).

●Set the clock (pages 15 - 18).

●Put a tape in the VCR.

●Turn on the VCR power. The VCR light should appear on the display panel. If it does not, press the VCR/TV button once.

Do each step within 60 seconds of the previous step.

1

Press the VCR button.

2

Press the VCR PLUS+ /ENTER button.

VCR PLUS+ PROG.

PLUS CODE : – – – – – – – –

TO END PUSH EXIT

3

Press the Number buttons to enter the PlusCode pro- gramming number of the program you wish to record. Then, press the VCR PLUS+ /ENTER button.

VCR PLUS+ PROG.

PLUS CODE : 13285 – – –

TO SET PUSH VCR+

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

4

Press the PLAY/o button or the STOP/p button to select a ONCE, DAILY, OR WEEKLY recording. Then, press the F.FWD/B button.

●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.

●DAILY: The VCR will record the same channel every day from Monday to Friday – starting at the same time and recording for the same length of time.

●WEEKLY: The VCR will record the same channel on the same day, at the same time, and for the same length of time every week.

VCR PLUS+ PROG.

→ONCE DAILY WEEKLY

SELECT op CHOOSE B

TO END PUSH EXIT

POWER		EJECT
VCR/TV	SPEED	MEMORY
REC/OTR		PAUSE/STILL

			PLAY		4
	REW		F.FWD
			STOP
	MENU	STATUS/EXIT		CLEAR
	1	2	3
	4	5	6	CH.	3
	7	8	9
1	MUTE	0	+100	VOL.
	VCR	TV	CBL/DBS
			VCR PLUS+
	VAR.SLOW		/ENTER	SLOW
2	TRACKING		F.ADV	X2 PLAY
	QUICK	TIME	INDEX REC END	SKIP

SEARCH

Helpful Hints

•CODE ERROR may flash on-screen after step 3 if you enter an incorrect number (for example, one that is too short). The previous screen will appear. Enter the correct PlusCode programming number.

•If the VCR PLUS+ CROSS REF. MAP reappears after step 3, the VCR PLUS + channel number for the recording you entered was higher than 99. In this case, enter the cor- rect CABLE/TV channel in the map. Then, press the MENU button and continue from step 4.

•If CLASH flashes on-screen at step 3, the timer recording you just pro- grammed and another timer record- ing overlap. The current timer record- ing will not occur.

•If you select DAILY at step 4, ERROR may flash on-screen if the program you want to record is

broadcast on a Saturday or Sunday.